L系列兩軸線軌立式加工中心
L系列兩軸線軌立式加工中心
機床特點 Machine tool features:
1、 x、丫為線性導軌設計，其運動速度快、滾動摩擦阻力小、潤滑 方便、長時間工作穩定性佳。
2、 Z軸采用硬軌設計，在粗加工時，吃刀量與切削力都較大，能有 效的避免床身震動比較厲害的問題，既能保證加工的效率，也能 保證加工的精度。
3、 三軸馬達座與主件一體鑄造并同時加工，可確保各軸組裝精度。
4、 廣泛適用于中等級要求的零件和模具的生產加工。
- X and Y axis are linear guide rail design, with a large number of advantages of fast moving speed, small rolling frictional resistance,convenient lubrication and long working stability.
- The Z axis adopts the design of box way type, when rough machining, engagement of the cutting edge and cutting force are bigger, which can effectively avoid the worse vibration of lathe bed, and not only guaranteeing the machining efficiency, but also ensuring the machining accuracy.also to ensure the processing precision.
- The three-axis motor base and the main parts are cast and processed simultaneously to ensure the assembly precision of each axis.
- It is widely used in the production and processing of parts and moulds with medium requirement.
規格及技術參數 Specifications and technical parameters
規格/機型 Specifications / Models | 單位 Company | L-650 | L-855 | L-1060 | L-1270 | L-1370 | L-1580 | L-1690 | L-1890 |
工作臺尺寸Workbench size | mm | 800 x 500 | 1000x550 | 1200x600 | 1360x700 | 1500x700 | 1700x800 | 1800x900 | 2000 x 900 |
T型槽(數目-尺寸 x 間距)T-slotsize(numbe「-sizexpitch) | mm | 3-18x144 | 5-18x90 | 5-18x100 | 5-18x122 | 5-18x135 | 5-22x140 | 5-22x165 | 5-22x165 |
大負荷 Maximum load | kg | 350 | 450 | 800 | 1000 | 1000 | 1500 | 1600 | 1600 |
三軸行程 X/Y/Z-axis stroke | mm | 600/500/500 | 800/550/550 | 1000/600/600 | 1200/700/600 | 1300/700/700 | 1500/800/700 | 1600/900/600 | 1800/900/600 |
主軸鼻端至臺面 Distance between spindle nose to worktable | mm | 110-610 | 110-610 | 120-720 | 87-687 | 190-890 | 130-830 | 160-760 | 160-760 |
主軸中心至立柱 Spindle center to column distance | mm | 560 | 560 | 635 | 785 | 785 | 810 | 950 | 950 |
主軸錐孔Spindle taper |
| BT40 | BT40 | BT40 | BT40/BT50 | BT50 | BT50 | BT50 | BT50 |
主軸直徑 Spindle diameter | mm | (P130 | ①150 | ①150 | 中 150/W55 | ①155 | <P155 | 0190 | ①190 |
主軸轉速Spindle speed | rpm | 8000 | 8000 | 8000 | 8000 | 8000 | 8000 | 8000 | 8000 |
三軸切削進給速率Triaxial Cutting feed rate | mm/min | 1-12000 | 1-12000 | 1-12000 | 1-12000 | 1-12000 | 1-10000 | 1-10000 | 1-10000 |
三軸快速移動X/Y/Z Triaxial Fast moving speed X/Y/Z | m/min | 36/36/20 | 36/36/20 | 36/36/20 | 24/24/18 | 24/24/18 | 20/20/15 | 20/20/15 | 20/20/15 |
定位精度 Positioning accuracy | mm | 土 0.005/300 | 土 0.005/300 | ±0.005/300 | ±0.005/300 | ±0.005/300 | ±0.005/300 | ±0.005/300 | ±0.005/300 |
重復定位精度 Re-positioning accuracy | mm | ±0.003/300 | ± 0.003/300 | 士 0.003/300 | 土 0.003/300 | ± 0.005/300 | ± 0.005/300 | ± 0.005/300 | 土 0.005/300 |
主軸驅動馬達(連續/30分鐘)Spindle driving motor (continuous/30 minutes) | kw | 5.5 | 7.5 | 11 | 11/15 | 15 | 18.5 | 18.5 | 18.5 |
X,Y,Z驅動馬達 X,Y,Z driving motor | kw | 2.0/2.0/2.0 | 2.0/2.0/3.0 | 3.0/3.0/3.0 | 3.0/3.0/4.5 | 3.0/3.0/4.5 | 4.5/4.5Z4.5 | 4.5/4.5Z4.5 | 4.5Z4.5/4.5 |
X,Y,Z滾珠絲桿 X,Y,Z ball bearing lead screw | mm | (p40/12 | (p40/12 | <p40/12 | 050/10 | <P50/10 | XY<P63/10Z0>50/10 | 055/12 | (P55/12 |
切削水馬達 Coolant Pump Motor | w | 370 | 370 | 370 | 370 | 370 | 370 | 370 | 370 |
占地面積(長 x 寬 x 高)Floor area(Length x widthx height) | mm | 2400 x 2300 x 2300 | 2600x2350x2600 | 3200x2700x2750 | 3600 x 3300 x 2850 | 4000 x 3300 x 3500 | 4400x4000x3500 | 4500 x 4200 x 3400 | 4900 x 4200 x 3400 |
整機重量(約)Total Weight(approximately) | kg | 5000 | 5500 | 8000 | 10000 | 12000 | 14000 | 15000 | 15500 |
